A new method for isolating and culturing mouse bone marrow mesenchymal stem cells / 中国实验血液学杂志

This study was purposed to establish a convenient and efficient method for isolating and culturing mouse bone marrow mesenchymal stem cells (MSC). The femurs and tibias of mouse were taken under sterile condition. MSC were isolated and cultured with flushing- out bone marrow or collagenase-digested bone fragment or bone marrow plus bone fragment. MSC colony number and size were compared. Immunophenotype and differentiation ability were tested to identify MSC. The results showed that colonies from bone marrow plus bone fragment group came out earliest and the colony number was 20 ± 4 at day 4; there were 11.5 ± 2.5 colonies in collagenase-digested bone fragment group and 9.5 ± 1.5 in flushing- out bone marrow group. The total cell yields of MSC after passaging showed best in bone marrow plus bone fragment group. Flow cytometry data showed the cultured cells expressed Sca-1, CD44 and CD29, not expressed pan-leukocyte surface marker CD45 and endothelial cell marker CD31. The isolated and cultured MSC could differentiate into osteoblast at the osteogenic differentiation condition, or adipocyte at adipogenic differentiation condition. It is concluded that the method of bone marrow plus bone fragment is convenient and efficient for isolating and culturing MSC.

Cloning and characterization of genes differentially expressed in human dental pulp cells and gingival fibroblasts / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To study the biological properties of human dental pulp cells (HDPC) by cloning and analysis of genes differentially expressed in HDPC in comparison with human gingival fibroblasts (HGF).</p><p><b>METHODS</b>HDPC and HGF were cultured and identified by immunocytochemistry. HPDC and HGF subtractive cDNA library was established by PCR-based modified subtractive hybridization, genes differentially expressed by HPDC were cloned, sequenced and compared to find homogeneous sequence in GenBank by BLAST.</p><p><b>RESULTS</b>Cloning and sequencing analysis indicate 12 genes differentially expressed were obtained, in which two were unknown genes. Among the 10 known genes, 4 were related to signal transduction, 2 were related to trans-membrane transportation (both cell membrane and nuclear membrane), and 2 were related to RNA splicing mechanisms.</p><p><b>CONCLUSION</b>The biological properties of HPDC are determined by the differential expression of some genes and the growth and differentiation of HPDC are associated to the dynamic protein synthesis and secretion activities of the cell.</p>

Scalable production of embryoid bodies with the rotay cell culture system / 生理学报

Embryonic stem (ES) cells are pluripotent cells capable of extensive proliferation while maintaining their potential to differentiate into any cell type in the body. ES cells can therefore be considered a renewable source of therapeutically useful cells. While ES-derived cells have tremendous potential in many experimental and therapeutic applications, the scope of their utility is dependent on the availability of relevant cell quantities. Therefore, most of the researches are being focused on the differentiation of ES cells. ES cell aggregation is important for embryoid body (EB) formation and the subsequent generation of ES cell derivatives. EB has been shown to recapitulate aspect of early embryogenesis, including the formation of a complex three-dimensional architecture wherein cell-cell and cell-matrix interactions are thought to support the development of the three embryonic germ layers and their derivatives. Standard methods of EB formation include hanging drop and liquid suspension culture. Both culture systems maintain a balance between allowing ES cell aggregation necessary for EB formation and preventing EB agglomeration for efficient cell growth and differentiation. However, they are limited in their production capacity. In this paper, we established a new approach for the mass production of EBs in a scalable culture system. The rotary cell culture system (RCCS, STLV type) was adopted to produce EBs. The vessel was placed on its rotary base and the experiment started with a beginning rotation rate of approximately 8 r/min which has been previously determined empirically as the optimal initial speed to yield randomized gravitational vectors while minimizing fluid shear stress. To keep the aggregations pfloating in simulated microgravityq, the rotation rate was increased as the EBs visibly grew. The EB production efficiency was calculated when different cell densities were inoculated. The kinetic change of EBs was measured during the time course of EB formation. Compared with the traditional method of producing EBs with hanging drop, the multi-potential of the resulting EBs in RCCS was analyzed by the capability of cardiomyocyte genesis. The results showed that EBs could be produced by RCCS with high efficiency. The optimal cell density inoculated in RCCS was 10000 cells/ml, in which EB production was about twice higher than that in the suspending culture. Day 4-5 was the optimal time point for harvesting EBs. To clarify whether the differentiated potential of EBs might be affected by the microgravity produced by the rotary cell culture system, cardiogenic induction during ES cell differentiation was evaluated in our study. It was manifested by appearance of spontaneously and rhythmically contracting myocytes. In addition, immuno-histological and RT-PCR detection showed that the harvested EBs in RCCS exhibited the expected cardiac genesis and morphology. So, scalable production of EBs is obtained by RCCS. It will provide a useful approach to generate a large quantity of ES-derived cells for further research or application.

Reconstruction of dentin-pulp complex structure by tissue engineering technology / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the possibility of reconstruction of dentin-pulp complex by tissue engineering technology.</p><p><b>METHODS</b>Rat dental pulp stem cells were seeded into HA-TCP scaffold and incubated for 20 hours in vitro. Then the cell-scaffold complex was implanted subcutaneously into the dorsal side of nude mice. 8 weeks postimplantation, the samples were extracted for histological and immunohistochemical examinations.</p><p><b>RESULTS</b>Three strata of tissue were observed in the hole of HA-TCP scaffold. They were dentin-like tissue, predentin-like tissue and pulp-like tissue respectively from the inner surface of the pore to the center. Dentin tubules were obvious in predentin-like and dentin-like tissue lining from the pulp-like tissue through predentin-like tissue and dentin-like tissue. Cells localized along the edge of pulp-like tissue were dense and polarized, resembling odontoblasts. Immunohistochemical study demonstrated DSP and DMP1 expression in these odontoblast-like cells and in the area of predentin-like tissue.</p><p><b>CONCLUSIONS</b>Tissue-engineered rat dentin-pulp complex was reconstructed by seeding HA-TCP scaffold with rat dental pulp stem cells.</p>

Experimental study of the isolation, culture and in chondrogenic differentiation of human bone mesenchymal stem cell / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To study the isolation of human bone marrow mesenchymal stem cells (MSCs) and in vitro differentiation into chondrocytes as potential seed cell for condyle cartilage tissue engineering.</p><p><b>METHODS</b>Human MSCs were isolated by percoll solution from normal human bone marrow sample and cultured in flasks. Specific cell surface markers were identified by flow-cytometry. After the cells were treated with inductive medium containing insulin, transferrin, pyruvate, dexathemesone and TGF-beta for 7 - 14 days, microscopic, histological and immuno-histo-chemical studies were performed for chondrogenic phenotype identification.</p><p><b>RESULTS</b>Primary cultures of human MSCs express CD29 and CD44 positively and meanly, but CD34, CD45 and HLA-DR negatively. After 14 days of induction, the cells were positively stained by safranin O. Immunohistochemical analysis proved strong type II collagen expression.</p><p><b>CONCLUSIONS</b>Percoll helps to generate a better isolation of MSCs from human bone marrow aspirates with a purity more above 95%. The isolated MSCs can be expanded and induced in vitro to differentiate into chondrocytes by inductive medium.</p>

Experimental study of cardiac muscle tissue engineering in bioreactor / 中国医学科学院学报

<p><b>OBJECTIVE</b>This study investigates construction of cardiac muscle cell-porous collagen scaffold complex in a bioreactor so as to unveil the possibility of generating 3-dimensional cardiac muscle tissue under the environment that mimics microgravity in vitro.</p><p><b>METHODS</b>1-2-day old neonatal rat cardiac muscle cells were isolated by sequential digestion and pre-plating methods, then seeded onto porous collagen scaffold. The cell-collagen complex was transferred into rotary cell culture system (RCCS) and incubated for 7 days. Cells cultured in 75 ml flasks and constructs cultures on plates served as control. Morphological changes of the cells were observed by light microscope and metabolic rate was recorded. Ultrastructure of the cells growing in porous collagen was observed by transmission electron microscopy. Content of total DNA and protein in the newly-formed tissue were analyzed. H-E and anti-sarcomeric alpha-actin stains were performed in comparison with native cardiac muscle.</p><p><b>RESULTS</b>The isolated cardiac muscle cells adhered to the bottom of the flasks 24 hours after plating and began to beat spontaneously. When incubated for 7 days in RCCS, cell-collagen constructs of form a continuous outer tissue layer containing cells aligned with each other. The cell population in the interior of the construct was less in density than the outer part. Transmission electron microscopy demonstrated that subcellular elements characteristic of cardiac myocytes were in the outermost layer of constructs. A strongly positive stains of anti-sarcomeric alpha-actin suggested presence of cell population of differentiated cardiac myocytes in these constructs. Construct biomass was not significantly different from that in neonatal rat ventricle and approximately 40% of that in adult rat ventricles. Construsts in plates contained a few of cells which were less than those in RCCS. Metabolic activity of cells cultured in RCCS was higher than that in flasks and plates.</p><p><b>CONCLUSIONS</b>Dissociated cardiac muscle cells cultured on 3-dimensional scaffolds in RCCS under favorable conditions can form engineered constructs with structural and functional features resembling those of native cardiac tissue.</p>

Recent advances in islet transplantation and pancreatic stem cell research / 中国医学科学院学报

This paper reviewed recent advances in pancreatic islet transplantation research, including islet isolation, purification, culture, cryopreservation and immunoisolation. Latest progresses in induction of pancreatic stem cell and embryonic stem cell to differentiate into insulin-producing islets were also introduced. On the basis of the present situation and future development of islet transplantation-based therapies for diabetes, the author thought that allogeous islet transplantation is a main choice for type I diabetes today and pancreatic stem cell transplantation for tomorrow.